Main Drive Shaft (Drive shaft is one-piece with integral, single-lead, work-hardened front worm, and integral, six-lead, work-hardened rear worm. Also includes pressed-on #1714 bearing and #9301 key).
MTD-11603
5
Washer, Flat, 1.50 x 1.75 x .010 Shim between drive shaft rear bearing and rear bearing cap to achieve 5-to-10 thousandths of an inch (.005-.010) end play on drive shaft.
MTD-736-04308
5
BLADE:46":SIDE:HOP 532-405380 Shim between drive shaft rear bearing and rear bearing cap to achieve 5-to-10 thousandths of an inch (.005-.010) end play on drive shaft.
MTD-742-05107-4046
5
Washer, Flat, 1.50 x 1.75 x .005 Shim between drive shaft rear bearing and rear bearing cap to achieve 5-to-10 thousandths of an inch (.005-.010) end play on drive shaft.
MTD-736-04306
xx
Shim Set (Incl. two #1224-1; two 1224-2 and one #1224-3)
MTD-GW-1325C
6
BOLT- hex. hd., 5/16"-24 x 1-1/8", engine mounting Specify GRADE 5 if ordering part locally.
MTD-710-0672